RAE SYSTEMS HYDROGEN SULFIDE (H2S) 50-800 PPMV GAS STAIN TUBES

Description

RAE Systems Hydrogen Sulfide (H2S) 50-800 ppmv Gas Stain Tubes 

Model: 10-103-20

RAE Systems Hydrogen Sulfide Features:

• Quick, on the spot measurement
• Easy to read sharp, clear color change
• Reproducible and accurate
• Low cost, economical
• No calibration necessary
• Ready for immediate use  

Draeger Tubes / RAE Tubes / Gastec Tubes Comparision:

RAE Systems and three independent laboratores have created a comparison of draeger tubes, RAE tubes, and other manufacturers. TRI/Environmenta), Stanford University, and San Francisco City College each created independent studies. All pumps tested passed the specification of less than 2% leakage after 2 minutes with a sealed tube inserted. Gases were filled into a Tedlar bag from a NIST-traceable standard cylinder and used either directly or after dilution in the bag.

Rae Gas Detection Tubes and Sampling Handbook:

This handbook provides an overview on the use of gas detection tubes and sampling pumps manufactured by RAE Systems. Use of a sampling pump other than a RAE Systems hand pump may cause serious errors. Always test any pump for leaks before use. Several manufacturers provide equivalent hand pumps and tubes. This document provide an overview on serveral makes and models and outlines the key differences. For example, draeger tubes will not work with a RAE pump and vice versa.